JEE Main 2018-19: Application Form, Eligibility Criteria, Syllabus, Admit Card, Exams Pattern and Dates etc.

(JEE) stands for Joint Entrance Examination which is the popular national level engineering entrance exam to be held yearly in India. JEE a common entrance examination for admission to different engineering courses. JEE score is the primary criteria for admission in Indian Institute of Technology and National Institute of Technology.

Through this candidates will get admission in NITs, CFTIs, and other engineering institutions. JEE Main is also an eligibility test for JEE Advanced which offers admission to IITs & ISM. Applicants should have Aadhaar card issued by UIDAI for filling the application form New changes which are made by CBSE for candidates.

In this article, JEE Application Form, Eligibility Criteria, Syllabus, Admit Card, Exams Pattern and Dates etc is mentioned on this page:


JEE Main Important Dates 

Exams dates of JEE is Application form release, Application Form Close, Image Correction Facility, Last date of fee payment, Application form correction window, and Release of Admit Card etc is described below.

The Exam date of offline & online paper and result date for JEE Main have been released. Check dates here:


Official notification release3rd week of  November 2017
Application form release1st week of  December 2017
Application Form Close3rd week of January 2017
Image Correction Facility2nd week of December 2018 (onwards)
Last date of fee payment2nd week of  January 2018
Application form correction windowMid of  January to 1st week of February 2018
Correction in Aadhaar detailsMid of  February 2018
Release of Admit Card2nd week of  March 2018
JEE Main offline exam (Pen and Paper Based Exam)1st week of  April 2018
JEE Main Answer Key1st week of April 2018
JEE Main online exam (Computer Based Exam)2nd week of April 2018
Display of answer key & OMR sheet (paper-1)3rd or mid of  April 2018
Result declaration (paper 1)Last week of  April 2018
Display of answer key & OMR sheet (paper-2)2nd week of  May 2018
Declaration of All India Rank for JEE Main (Paper 2)Mid of  May 2018
Counseling start2nd week of June 2018



JEE Main New Changes Introduced Last year:

The Ministry of Human Resource Development, Government of India has introduced some new changes in the pattern of JEE Mains. So candidates are suggested to stay update about JEE Main.

Here are the highlights:

  • No weightage will be given to 12th class marks for calculating All India Rank (AIR) in JEE Main.
  • In order to qualify for admission to IITs, NITs, IIITs, CFTIs, candidates must have at least 75% marks (65% for SC/ST)in higher secondary examination or must be in top 20 percentile in class 12th examination conducted by respective boards.
  • Moreover, candidates should have Aadhaar Card Number to fill the application form.
  • Candidates from Meghalaya, J & K and Assam are excluded from this provision. Such candidates have to enter passport number, ration card number, bank account number or any other valid Govt. identity number to get examination center in these states only.

JEE Main Application Form

Application from JEE Main will release on 1st week of  December and Application Form will Close on  3rd week of January. Candidate should fill and submit the application before the due date if candidates give after the due date application will be canceled. The application form will be available through online, official portal of authority.

All the candidates must read the information brochure carefully before filling the online application form of JEE Main to get details about how to apply when to fill application fee & payment mode etc. The details regarding JEE Main application form are given below:

  • Candidates have to fill the JEE Main application form via online mode
  • No printed copy will be provided to apply for JEE Main.
  • Applications are expected to be released in the first week of December.
  • To apply for JEE Main, students should have Aadhaar Number/Aadhaar Enrollment Number/Registration Number which will be provided by facilitation center.
  • In addition to filling personal & academic details, candidates also have to upload scanned images of photograph and signature prescribed specifications.
  • Candidates can download the acknowledgment page as the proof of successful submission of application form.

JEE Main Application Fee:

Candidates can pay JEE application fees through online. Online paying is possible through credit card/debit card or e-challan etc. Once candidates remit or pay by online it will not be refunded back to candidates. Candidates are advised to keep fill application form printed copies of it for further reference and use.

Below is given application form related detail:

  • Payment of fee can be done either through credit card/debit card or e-challan.
  • Candidates opting e-challan are required to make the payment in Syndicate/ICICI/HDFC/Canara Bank in cash.

JEE Main Application Form Correction

  • Corrections will be permitted in uploaded images (signature and photograph).
  • Correction window will also open for correction in application form details like the change in exam mode from PBT to CBT, a city of examination, change in paper-2 to paper-1.
  • Candidate can make changes only in the selected fields.


Application fee of JEE Mains will depend upon the gender of candidate, category and exam mode. Candidates can check the application fee from the below table:

PapersOffline mode (Pen & Paper Based)Online mode (Computer Based)
AppearingGeneral/OBCs (Boys)SC/ST/PWD/All GirlsGeneral/OBCs (Boys)SC/ST/PWD/All Girls
For Examination Centres opted in India
Paper 1 or 21000500500250
Paper 1 and 2 both18009001300650
For Examination Centres opted in foreign country
Paper 1 or 22500125025001250
Paper 1 and 2 both3800190038001900

JEE Main Eligibility Criteria

Candidates must know about eligibility criteria of JEE main. Candidates may face difficulty t time of admission process if they fail to know the JEE eligibility criteria. Candidates completed Diploma (3 years) holders are also eligible to apply.

He/she appearing/passed a 12th or equivalent exam in 2015 or 2016 with PCM are also eligible to apply. Below is provided Age Criteria, Qualification Criteria, Number of Attempts, and Eligibility For Admission in IITs, NITs, CFTIs etc are provided here.


The eligibility for appearing JEE Main is given below:

Age Criteria:

  • Date of Birth: Candidates those born on or after 1st October 1993 are eligible for writing the JEE Main examination.
  • Relaxation:5 years relaxation shall be provided in the upper age limit for SC/ST & PWD candidates (i.e. DOB falls on or after 1st October 1988).
  • Date of Birth will be considered as mentioned in secondary education board certificate.

JEE Main  Qualification Criteria:

  • Qualifying Exam: It is must for the candidates to pass the 12th examination/qualifying examination with 5 subjects to be eligible for JEE Main 2018.

  • Subjects: The qualifying examination must be passed/appearing with Physics, Chemistry, and Mathematics

  • No Minimum Marks: There are no minimum marks required in a 12th examination for writing the JEE Main exam. However, candidates have to secure the passing marks.

  • Passing Year: Those who have appeared and passed the higher secondary examination in 2016 and 2017 are also eligible to apply. Moreover, candidates appearing the final examination of 12th in 2018 can also fill the JEE Main application form.

  • In case if candidate appeared the 12th examination in 2015 but not passed in 2015, passed in 2016 are also not eligible.

  • Diploma Holders: Diploma holders may also apply for JEE Main 2018 but only eligible for admission to IITs. In other words, Diploma holders will be eligible for JEE Main so that they can further apply for JEE Advanced but not eligible for admission on the basis of JEE Main scores.

Number of Attempts in JEE Main :

Total 3 attempts will be given for clearing the JEE Main. Attempts will be counted from the year 2017 onwards. JEE Advanced can be attempted maximum 2 times in consecutive years.

Eligibility for Admission in IITs, NITs, CFTIs:

Percentage Marks: To be eligible for admission in IITs, NITs, CFTIs, candidates should have obtained 75% marks in the 2nd examination or must be in the top 20 percentile in the 12th examination of respective boards. The qualifying marks for SC/ST will be 65%.


JEE Main Exam Pattern

Candidate will be given 3 hours to complete paper no extra time will be given to any candidates by supervisors as or rules and regulation of the board. Paper mode will be conducted in various language which are mention below in detail. Question will be objective type questions in paper 1 and 2 in exams. Below paper 1 and 2 courses, exams date, time duration, paper mode, language, subjects’ etc following are mentioned below.

Here, we are describing the JEE Main Exam Pattern. It provides details about a number of questions, subjects covered, marking scheme, etc. As JEE Main is conducted in two different papers. Check the JEE exam pattern and exam structure separately for both the papers:

For JEE Main Paper-1:


    • P aper-1 is conducted for admission to



  • Exam Mode: The exam mode for paper 1 will be offline (PBT) as well as online (CBT). Candidates can opt any one of the modes as per their suitability.
  • Subjects: The paper-1 will consist of Physics, Chemistry, and Mathematics
  • Number of Questions:30 questions will be asked from each subject with the total of 90 questions comprising of 360 marks.
  • Type of Questions: Only objective type questions will be asked in Paper-1.
  • Language: For all exam cities, the question paper medium choice will be English & Hindi(except exam centre cities in Gujarat, Daman & Diu and Dadra and Nagar Haveli where choices for question paper will be English, Hindi and Gujarati). The choice for question paper should be exercised while filling up the application form.
  • Exam Duration: The time duration will be 3 hours.
  • Marking Scheme: Candidates will be provided with +4 marks for each correct answer.
  • Negative Marking: In a case of the wrong answer, one mark will be deducted.

For JEE Main Paper-2:

  • Course: Paper-2 is conducted for admission to Arch/B.Planning courses.

  • Exam Mode: The exam mode for this paper will be offline (PBT)
  • Number of Questions:30 questions will be asked in Mathematics (Part-1), 50 questions in aptitude test (Part-2) and 2 questions in drawing comprising of total 390 marks.
  • Type of Questions: The Mathematics and Aptitude test section will contain objective type questions. Drawing test will be subjective.
  • Language: For all exam cities, the question paper medium choice will be English & Hindi(except exam centre cities in Gujarat, Daman & Diu and Dadra and Nagar Haveli where choices for question paper will be English, Hindi and Gujarati). The choice for question paper should be exercised while filling up the application form.
  • Exam Duration: The time duration will be 3 hours.
  • Marking Scheme: Candidates will be provided with +4 marks for each correct answer.
  • Negative Marking: In the case of the wrong answer, one mark will be deducted.



PapersSubjectsNumber of QuestionsMaximum Marks
Paper-1Physics30 Questions120 marks
Chemistry30 Questions120 marks
Mathematics30 Questions120 marks
Paper-2Mathematics30 Questions120 marks
Aptitude Test50 Questions200 marks
Drawing2 Questions70 marks


Language Medium of JEE Main

S.NoExam CentresMedium of Language
1All Examination Centre CitiesEnglish and Hindi Medium
2Examination Centre Cities in Gujarat, Daman & Diu and Dadra and Nagar HaveliEnglish, Hindi and Gujarati
3Examination Centre Cities in MaharashtraEnglish, Hindi, Marathi and Urdu


JEE Main Exam Schedule


JEE Main exams schedule is prepared which detail is provided timing of paper 1 and 2 etc.

S.NoScheduleTimings for Paper ITimings for Paper II
1Entry in the Exam Centre7:00 AM1:00 PM
2Entry in Exam Hall9:00 AM1:30 PM
3Distribution of Test Booklet9:20 AM1:50 PM
4Seal of the Test Booklet to be Broken/Opened9:25 AM1:55 PM
5Last Entry in the Examination Hall9:30 AM2:00 PM
6Commencement of Test9:30 AM2:00 PM
7Conclusion of Test12:30 PM5:00 PM


JEE Main Admit Card

Admit Cards/Hall ticket is an mandatory document for candidate. Its Candidates responsibility to keep safe their hall ticket until the end of exams. Candidates should bring Hall ticket at the time of examination if not bring candidate will not allow to write paper at exam centre.

Admit card contains candidates related detail such as roll number, name address, centers, and a birth of date etc. Candidates are advised to keep printed copies of it for further use.


  • After submitting the application form, candidates start searching the admit card. JEE Main 2018 admit card will be issued in the second week of March 2018.
  • CBSE will release the admit card through online mode.
  • Admit card will contain exam schedule, exam center details, candidate’s roll number, etc.


JEE Main Answer Key

Answer key will be released on 1st and 2nd paper on 2nd week of May. Candidate can download images of response sheets (OMR sheets) and question paper through online, official portal. Candidate can download it after the completion of examination.

Its CBSE responsibility to declare the answer key of JEE main Through answer key candidates can their answers with the official answer key to know the expected marks  Those who are not satisfied with the answers may challenge the answer key by paying Rs. 1000/- per question

JEE Main Result

CBSE released result to candidates of JEE main cut off and All India rank for paper 1 Result of paper 1st will be released last week of April and 2nd paper on mid of May. Through online, official portal candidates can check result. It will be published online by CBSE authority.

Candidate those wants to check result on online have to enter their roll number and date of birth and click on the submit button to generate their score card. If candidate have type incorrect detail page will show error. Candidate can save in laptop/computer or can take screenshot in phone for further use.


  • The result of JEE Main will be declared in the last week of April through online mode.
  • JEE Main result indicates actual scores and rank secured in the entrance examination.
  • On the basis of JEE Main result, students will also get the idea about whether they are eligible for appearing JEE Advanced or not.
  • All India Rank (AIR) will be considered for admission to IITs, NITs, IIITs, CFTIs, SFTIs, and others.


JEE Main Cut-Off

Candidates score above the cut-off marks will get admission in the top colleges of the country. Every year’s different college and institution change cut-off marks according to various factors such as number of students appearing for the exam, difficulty level of exam, etc. The Different college and institution has different cut-off marks.


  • In order to be eligible for JEE Advanced and for admission to top colleges, students have to secure cut-off marks.
  • JEE Main 2018 cut-off will be announced after the completion of the exam. Meanwhile, students can check the previous year’s cut-off marks.


JEE Main Cutoff and Number of Candidates Qualified for JEE Advanced 

S.No.CategoryCut offNumber of Candidates Qualified for JEE Advanced


Previous year JEE Main Cutoff 

S.NoCategoryCut-Off Score
1General Category100
3Scheduled Caste52
4Scheduled Tribe48


Top 10 NIT Colleges Cutoff

S.NoName of NIT CollegeOpening Rank Closing Rank
1NIT Calicut1128679
2NIT Durgapur6945159
3NIT Kurukshetra3529806
4NIT Raipur2690465
5NIT Rourkela1571467
6NIT Surathkal432588
7NIT Srinagar74252451
8NIT Tiruchirappalli5726489
9NIT Uttarakhand26456366
10NIT Warangal529270


S.NoName of IIIT CollegeOpening Rank Closing Rank
1IIIT, Allahabad7016198
2IIIT, Guwahati139627928
3IIIT, Gwalior8917860
4IIIT, Jabalpur16825501
5IIIT, Kancheepuram14230344


Top 3 GFTI Colleges Cutoff

S.NoName of GFTI CollegeOpening Rank Closing Rank
1BITS Mesra3151314
2GKV Haridwar11650951
3IT-GGU Bilaspur36053965


JEE Counseling

Candidates have to face different rounds of counseling. Candidates passed in it will be select for admission. Candidates will be called as per ranks obtained by candidates in the merit list.

Candidate appearing counseling session have to bring all original requirement document with them documents list is given below. If in case candidates had submitted an incorrect document that candidate’s admission will be canceled.


  • JOSAA /CSAB are the authorities which conduct the centralized counseling for admission to NITs/IITs/IIITs and CFTIs.
  • Admission will be offered to the candidates based on AIR and choices filled by them.
  • To get seats, it is mandatory for the candidates to participate in counseling and seat allocation process.
  • There are a huge number of colleges in every state that also offers admission through JEE Main. To get admission in these colleges, students have to apply separately in state counseling.


Documents to be Submitted during Verification:

  • 3 Passport size Photographs
  • JEE Main Admit Card 2017
  • JEE Main Result 2017
  • Proof of Date of Birth
  • Seat Allotment letter
  • Photo Identity Card
  • Proof of Seat Acceptance Fee Payment
  • 12th standard Mark Sheet
  • Category Certificate (if applicable)



Syllabus of JEE

Candidate appearing exams of JEE main is suggested to gather all required information regarding JEE syllabus, Exams Pattern, and Dates. From the syllabus paper of 1st and 2nd will be set. If Candidate gets familiar with previous year question paper candidates will get knowledge about exam pattern and questions weightage.

JEE main 1st  paper in exams will asked from B.Tech (Engineering) while paper 2 will be asked for architecture (B.Arch). Candidates are suggested at the time of exams write that question you know very well than write difficult question answer this will give you time to complete paper.


Physical chemistry

  • General topics: Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept) involving common oxidation-reduction, neutralization, and displacement reactions; Concentration regarding mole fraction, molarity, molality, and normality.
  • Gaseous and liquid states: Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gasses, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gasses.
  • Atomic structure and chemical bonding: Bohr model, the spectrum of hydrogen atom, quantum numbers; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of the hydrogen atom, shapes of s, p, and d orbitals; Electronic configurations of elements (up to atomic number 36); Aufbau principle.
  • Pauli’s exclusion principle and Hund’s rule; Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Orbital energy diagrams for homonuclear diatomic species; Hydrogen bond; Polarity in molecules, dipole moment (qualitative aspects only); VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).
  • Energetics: First law of thermodynamics; Internal energy, work, and heat, pressure-volume work; Enthalpy, Hess’s law; Heat of reaction, fusion, and vapourization; Second law of thermodynamics; Entropy; Free energy; Criterion of spontaneity.
  • Chemical equilibrium: Law of mass action; Equilibrium constant, Le Chatelier’sprinciple (effect of concentration, temperature, and pressure); Significance of ΔG and ΔG0 in chemical equilibrium.
  • Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.
  • Electrochemistry: Electrochemical cells and cell reactions; Standard electrode potentials; Nernst equation and its relation to ΔG; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Concentration cells.
  • Chemical kinetics: Rates of chemical reactions; Order of reactions; Rate constant; First order reactions; Temperature dependence of rate constant (Arrhenius equation).
  • Solid state: Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), a close-packed structure of solids (cubic), packing in fcc, bcc and hcp lattices; Nearest neighbors, ionic radii, simple ionic compounds, point defects.
  • Solutions: Raoult’s law; Molecular weight determination from lowering of vapor pressure, elevation of boiling point and depression of freezing point.
  • Surface chemistry: Elementary concepts of adsorption (excluding adsorption isotherms); Colloids: types, methods of preparation and general properties;  Elementary ideas of emulsions, surfactants, and micelles (only definitions and examples).
  • Nuclear chemistry: Radioactivity: isotopes and isobars; Properties of α, β and γ rays; Kinetics of radioactive decay (decay series excluded), carbon dating; Stability of nuclei on proton-neutron ratio; Brief discussion on fission and fusion reactions.

Inorganic chemistry

  • Isolation/Preparation and properties of the following non-metals: Boron, silicon, nitrogen, phosphorus, oxygen, sulfur, and halogens; Properties of allotropes of carbon (only diamond and graphite), phosphorus and sulfur.

  • Preparation and properties of the following compounds: Oxides, peroxides, hydroxides, carbonates, bicarbonates, chlorides and sulfates of sodium, potassium, magnesium, and calcium; Boron: diborane, boric acid, and borax.
  • Aluminum: alumina, aluminum chloride, and alums; Carbon: oxides and oxyacid (carbonic acid); Silicon: silicones, silicates, and silicon carbide; Nitrogen: oxides, oxyacids, and ammonia; Phosphorus: oxides, oxyacids (phosphorus acid, phosphoric acid) and phosphine; Oxygen: ozone and hydrogen peroxide;
  • Sulfur: hydrogen sulfide, oxides, sulfurous acid, sulphuric acid and sodium thiosulphate; Halogens: hydrohalic acids, oxides, and oxyacids of chlorine, bleaching powder; Xenon fluorides.
  • Transition elements (3d series): Definition, general characteristics, oxidation states and their stabilities, color (excluding the details of electronic transitions) and calculation of spin-only magnetic moment; Coordination compounds.



  • Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations. Quadratic equations with real coefficients, relations between roots and coefficients, a formation of quadratic equations with given roots, symmetric functions of roots.
  • Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic means, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers. Logarithms and their properties.
  • Permutations and combinations, Binomial theorem for a positive integral index, properties of binomial coefficients. Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix.
  • The determinant of a square matrix of order up to three, the inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.
  • Addition and multiplication rules of probability, conditional probability, Bayes Theorem, independence of events, computation of the probability of events using permutations and combinations.


  • Trigonometric functions, their periodicity, and graphs, addition and subtraction formulae, formulae involving multiple and sub-multiple angles, the general solution of trigonometric equations. Relations between sides and angles of a triangle, sine rule, cosine rule, half-angle formula and the area of a triangle, inverse trigonometric functions (principal value only).

Analytical geometry

  • Two dimensions: Cartesian coordinates, the distance between two points, section formulae, the shift of origin.
  • The equation of a straight line in various forms, angle between two lines, the distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle.
  • The equation of a circle in various forms, equations of tangent, normal and chord.
  • Parametric equations of a circle, an intersection of a circle with a straight line or a circle, the equation of a circle through the points of intersection of two circles and those of a circle and a straight line. Equations of a parabola, ellipse, and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal.

Locus problems.

  • Three dimensions: Direction cosines and direction ratios, an equation of a straight line in space, an equation of a plane, the distance of a point from a plane.

Differential calculus

  • Real valued functions of a real variable, into, onto and one-to-one functions, sum, difference, product and quotient of two functions, composite functions, absolute value, polynomial, rational, trigonometric, exponential and logarithmic functions.
  • Limit and continuity of a function, limit, and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions.
  • Even and odd functions, the inverse of a function, continuity of composite functions, intermediate value property of continuous functions.


  • Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities about the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer).
  • Determination of g using simple pendulum, Young’s modulus by Searle’s method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using u-v method, Speed of sound using resonance column, Verification of Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.


  • Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform circular motion; Relative velocity. Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction.
  • Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic collisions.
  • Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Motion of planets and satellites in circular orbits; Escape velocity. Rigid body, a moment of inertia, parallel and perpendicular axes theorems, a moment of inertia of uniform bodies with simple geometrical shapes.
  • Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders, and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies. Linear and angular simple harmonic motions.

Thermal physics

  • Thermal expansion of solids, liquids, and gasses; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation.
  • Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gasses); Isothermal and adiabatic processes, bulk modulus of gasses.
  • Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gasses); Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.

Electricity and magnetism

  • Coulomb’s law; Electric field and potential; Electrical potential energy of a  system of point charges and electrical dipoles in a uniform electrostatic field; Electric field lines.
  • The Flux of the electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor.


  • Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification. Wave nature of light: Huygen’s principle, interference limited to Young’s double-slit experiment.


Freehand drawing

  • This would comprise of simple drawing depicting the total object in its right form and proportion, surface texture, relative location and details of its parts in appropriate scale. Common domestic or day-to-day life usable objects like furniture, equipment, etc., from memory.

Geometrical drawing

  • Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons, circles, etc. Study of the plan (top view), elevation (front or side views) of simple solid objects like prisms, cones, cylinders, cubes, splayed surface holders, etc.

Three-dimensional perception

  • Understanding and appreciation of three-dimensional forms with building elements, color, volume, and orientation. Visualization through structuring objects in memory.

Imagination and aesthetic sensitivity

  • Composition exercises with given elements. Context mapping. Creativity checks through an innovative uncommon test with familiar objects. The sense of color grouping or application.

Architectural awareness

  • General interest and awareness of famous architectural creations – both national and international, places and personalities (architects, designers, etc.) in the related domain.


Books for JEE

  • Concepts of Physics Vol I and II by H.C. Verma

  • Fundamentals of Physics by Halliday, Resnick & Walker
  • Problems in General Physics by I.E. Irodov
  • Maths XI & XII by R.D. Sharma
  • Plane Trigonometry Part 1 by S.L. Loney
  • Higher Algebra by Hall and Knight
  • Problems in Calculus of One Variable by I.A. Maron
  • Physical Chemistry by O.P. Tandon
  • Organic Chemistry by Paula Bruice Yurkanis
  • Chemistry XI & XII by  NCERT

How to Prepare for JEE Mains

Get some beneficial tips for scoring well in JEE Main examination:

  • Make a proper study time-table.
  • Exam pattern plays a very important role in exam preparation. Understand the syllabus and exam pattern.
  • To score well in an examination, students are advised to prepare PCM subjects thoroughly of class 11th and 12th standard.
  • Candidates having a good command over NCERT books can easily score good marks in JEE Main.
  • Candidates can also go through the past years question papers to know about the difficulty level of the exam.
  • Practice mock tests to know your weak areas.
  • Time Management is very important. Set your time table so that you can easily decide your study hours. Divide your time well among school, tuition, coaching classes, exercise, entertainment, etc.
  • Do not take stress and keep yourself health



Hi Guys, I am Sandeep Co-founder of IASpaper and UPSCToday Staying in Mumbai (India) and pursuing graduation in Computer Science and Engineering from Mumbai University. I love helping Aspirants. You may join me on Facebook

3 thoughts on “JEE Main 2018-19: Application Form, Eligibility Criteria, Syllabus, Admit Card, Exams Pattern and Dates etc.

  • January 9, 2017 at 10:03 pm

    no reply for queries sir

  • July 10, 2017 at 2:03 am

    Greetings! Quick question that’s completely off topic.
    Do you know how to make your site mobile friendly? My website looks
    weird when viewing from my iphone 4. I’m trying to find a template or plugin that might be able to correct this problem.
    If you have any suggestions, please share. Cheers!


Leave a Reply

Your email address will not be published. Required fields are marked *