IPU CET 2021 Syllabus (Available), Complete Subject wise Syllabus – Check Here
Latest Applications Open 2021:
Indraprastha University Common Entrance test is considered to be the university level undergraduate engineering entrance exam held under the guidance of Guru Go bind Singh Indraprastha University(GGSIPU).
This exam is held per year through GGSIPU. This exam is not more than an opportunity to take admission in the undergraduate courses offered by a range of colleges and other private and government colleges and the students can register for the exam after the declaration of the exam form.
IPU CET 2021 Syllabus
Those students who are about to appear in the IPU CET exam must be knowing of the syllabus related exam. To get acquainted of the exam syllabus, you are required to know each section of the mentioned list of syllabi.
Since it is no rare to be known that any type of question may get asked in the exam so you are required to know each corner of what subjects are included in your syllabus on the basis of which students can prepare for the exam.
The authorities who undertake everything related exam is responsible for generating the syllabus of IPU CET 2021. Through syllabus, the students are to get identified to each topic of Physics, Chemistry, and Mathematics.
For the Biotechnology section, the syllabus includes the topics as per CBSE OF 11^{th} and 12^{th}. So, it is possible to get prepared for the exam with the help of syllabus. This article will make you familiar about the syllabus of IPU CET 2021 so anyone willing to appear for the exam must go through the given syllabus,
The syllabus includes the threesection s that are as follows Mathematics, Physics, and Chemistry. The syllabus pattern will be identical to the syllabus from CBSE of 10 and 12^{th} class. You will get to know more of the syllabus when the exam notification declares and the colleges offer the thorough curriculum.
You are to go to each section stepbystep to know about each and every topic included in a syllabus. Before you prepare for the exam, it is suggested to the students to read the topics and chapters well given in the list.
The Syllabus for IPU CET 2021 is given below in brief:
Latest Applications For Various UG & PG Courses Open 2021:

 Lovely Professional University, Punjab  Admissions Open for All Courses 2021. Apply Now
 UPES, Dehradun  Admissions Open for All Courses 2021. Apply Now
 Chandigarh University, Punjab  Admissions Open for All Courses 2021. Apply Now
 GD Goenka, Gurgaon  Admission Open for All Courses 2021. Apply Now
 DIT University, Dehradun  Admission Open for All Courses 2021. Apply Now
 Manav Rachna University, Haryana  Admission Open for all courses 2021. Apply Now
 Sharda University  Admission Open all courses 2021. Apply Now
Mathematics Syllabus
 Sets and Functions
 Algebra
 Coordinate Geometry
 Calculus
 Statistics and Probability etc.
Chemistry Syllabus
 Physical Chemistry
 Organic chemistry
 Inorganic Chemistry
Physics Syllabus
 Physical World and Measurement
 Kinematics
 Law of Motion
 Work, Energy, and Power
 Gravitation
 Properties of Bulk Matter
 Thermodynamics
 The behavior of Perfect Gases and Kinetic Theory of Gases
 Oscillations and Waves etc.
IPU CET 2021 Syllabus for B.Tech CET (Course Code – 131)
Name of Subjects  Percentage of questions covered in paper 
Physics  33.33% 
Chemistry  33.33% 
Mathematics  33.33% 
IPU CET 2021 Syllabus for B.Tech in Biotechnology (Course Code – 130)
Name of the Subjects  Percentage of questions covered in paper 
Physics  Up to 12th Level – (20%) 
Chemistry  Up to 12th Level – (20%) 
Mathematics  Up to 10th Level – (20%) 
Biology (Botany and Zoology)  Up to 12th Level – (40%) 
Biotechnology  Up to 12th Level – (40%) 
Semester wise Bachelor of Technology (B.tech) Degree Syllabus
First Semester Examination
Theory Paper
Code No.  Paper  L  T/P  Credits 
ETMA 101  Applied Mathematics – I  3  1  4 
ETPH 103  Applied Physics – I  2  1  3 
ETCH 105  Engineering Chemistry  2  1  3 
ETME 107  Manufacturing Process  2  0  2 
ETCS 109  Introduction to Computers and Auto CAD  2  1  3 
ETEL 111  Communication Skills – I  2  1  3 
ETEL 113  Impact of Science & Technology on Society  1  0  1 
Practical/viva voce
Code No.  Paper  L  T/P  Credits 
ETPH 151  Applied Physics Lab. – I  –  2  1 
ETCH 153  Engineering Chemistry Lab.  –  2  1 
ETCS 155  Introduction to Auto CAD Office Automation and Web Design  3  2  
ETME 157  Workshop Practice  –  3  2 
ETME 159  Engineering Graphics Lab.  –  2  1 
Total  14  17  26 
Second Semester Examination
Theory Papers
Code No.  Paper  L  T/P  Credits 
ETMA 102  Applied Mathematics – II  3  1  4 
ETPH 104  Applied Physics – II  2  1  3 
ETCH 106  Environmental Studies  2  1  3 
ETCS 108  Introduction to Programming  2  1  3 
ETME 110  Engineering Mechanics  2  1  3 
ETEC 112  Electrical Science  2  1  3 
ETEL 114  Communication Skills – II  2  1  3 
Practical/viva voce
Code No.  Paper  L  T/P  Credits 
ETPH 152  Applied Physics Lab. – II  –  2  1 
ETCH 154  Environmental Studies Lab.  –  2  1 
ETCS 156  C Programming Lab.  –  2  1 
ETME 158  Engineering Mechanics Lab.  –  3  2 
ETEC 160  Electrical Science Lab.  –  2  1 
Total  15  18  28 
Detail Syllabus of Every Subject
Here you can get Detail syllabus of Every Subject and doing full Preparation.
Applied Mathematics – I (ETMA 101)
Unit I
 Complex numbers and infinite series: De Moivre’s theorem and roots of complex numbers. Euler’s theorem, Logarithmic Functions, Circular, Hyperbolic Functions, and their Inverses.
 Convergence and Divergence of Infinite series, Comparison test d’Alembert’s ratio test. Higher ratio test, Cauchy’s root test. Alternating series, Lebnitz test, Absolute and conditioinal convergence. (No. of Hrs. 10)
Unit II
 Calculus of one variable: Successive differentiation. Leibnitz theorem (without proof) McLaurin’s and Taylor’s expansion of functions, errors, and approximation.
 Asymptotes of Cartesian curves. Curveture of curves in Cartesian, parametric and polar coordinates, Tracing of curves in Cartesian, parametric and polar coordinates (like conics, astroid, hypocycloid, Folium of Descartes, Cycloid, Circle, Cardioid, Lemniscate of Bernoulli, equiangular spiral).
 Reduction Formulae for evaluating, Finding area under the curves, Length of the curves, volume, and surface of solids of revolution.
Unit III
 Linear Algebra – Matrices: Rank of matrix, Linear transformations, Hermitian and skew – Hermitian forms, Inverse of a matrix by elementary operations. Consistency of linear simultaneous equations, Diagonalisation of a matrix, Eigenvalues, and eigenvectors. Caley – Hamilton theorem (without proof).
Unit IV
 Ordinary Differential Equations: First order differential equations – exact and reducible to exact form. Linear differential equations of higher order with constant coefficients. The solution of simultaneous differential equations. Variation of parameters, Solution of homogeneous differential equations – Cauchy and Legendre forms.
Applied Physics – I (ETPH 103)
Unit I
 Interference of Light: Interference due to division of wavefront and division of amplitude, Young’s doubleslit expt., Interference, Principle of Superposition, Theory of Biprism, Interference from parallel thin films, wedgeshaped films, Newton rings, Michelson interferometer.
 Diffraction: Fresnel Diffraction, Diffraction at a straight edge, Fraunhofer diffraction due to N slits, Diffraction grating, absent spectra, dispersive power of Grating, resolving power of prism and grating.
Unit II
 Polarization: Introduction, production of planepolarized light by different methods, Brewster and Malus Laws. Double refraction, Quarter & halfwave plate, Nicol prism, specific rotation, Laurent’s half shade polarimeter.
 Optical Instruments: Ramdson & Huygen Eyepieces, Electron microscope.
Unit III
 Laser: Introduction, temporal and spatial coherence, the principle of Laser, stimulated and spontaneous emission, Einstein’s Coefficients, HeNe Laser, Ruby Laser, Application of Lasers.
 Fibre Optics: Introduction, numerical aperture, stepindex, and gradedindex fibers, attenuation & dispersion mechanism in optical fibers (Qualitative only), application of optical fibers, optical communication (block diagram only)
Unit IV
 Mechanics: Central and noncentral forces, Inverse square force, SHM, Damped, undamped and forced Oscillations.
 Special Theory of Relativity: Frame of reference, MichelsonMorley experiment, basic postulates of special relativity, Lorentz transformations (spacetime coordinates & velocity only), massenergy relation.
Engineering Chemistry (ETCH 105)
Unit I
 Water Technology: Introduction and specifications of water, Hardness and its determination (EDTA method only), Alkalinity, Boiler feed water, boiler problems – scale, sludge, priming & foaming: causes & prevention, Boiler problems – caustic embrittlement & corrosion : causes & prevention, Removal of silica & dissolved gases; carbonate & phosphate conditioning, Water softening processes : Lime – soda process, Ion exchange method, colloidal conditioning & Calgon treatment , Water for domestic use.
Unit II
 Fuels: Classification, calorific value of fuel, (gross and net), Determination of calorific value of fuels, bomb calorimeter, Boy’s Gas calorimeter, Solid fuels – Proximate and ultimate analysis, High & Low temperature carbonisation, manufacture of coke (OttoHoffmann oven), Liquid Fuels – PetroleumChemical composition, fractional distillation, Cracking – Thermal & catalytic cracking, Octane & Cetance No. and its significance, Power Alcohol, Analysis of flue gases (Orsat’s apparatus).
Unit III
 Gaseous State: Gas Laws and Kinetic Theory of gases, Distribution of molecular velocities, Mean free path, Real gasesnon ideal behavior, Causes of deviation from ideal behavior, Vander Waal’s equation, liquefaction of gases.
Unit IV
 Thermochemistry: Hess’s Law, Heat of Reaction, Heat of dilution, Heat of Hydration, Heat of neutralization and Heat of Combustion, Effect of temperature on the heat of reaction at constant pressure (Kirchoff’s equation), Flame Temperature
Unit V
 The Phase Rule: Definition of various terms, Gibb’s Phase rule, Application of phase rule to one component system The water system and sulfur system, Twocomponent system LeadSilver, FeCl_{3}– water, Na_{2}SO_{4} – water.
Unit VI
 Catalysis: Characteristics, Types, and theories of catalysis, the concept of promoters, inhibitors, and poisons, Homogenous catalysis (mechanisms of acidbase and Enzyme), catalysis by metal salts, Heterogenous catalysis (mechanism of surface reactions).
Manufacturing Process (ETME 107)
UnitI
 Casting Processes: Principles of metal casting: Pattern materials, types and allowance; Study of molding, sand molding, tools, molding materials, classification of molds, core, elements of the gating system, casting defects, description and operation of cupola: special casting processes e.g. diecasting, permanent mould casting, centrifugal casting, investment casting.
UnitII
 Smithy and Forging: Basic operation e.g. upsetting, fullering, flattening, drawing, swaging: tools and appliances: drop forging, press forging.
 Bench Work and Fitting
 Fitting, sawing, chipping, thread cutting (die), tapping; Study of hand tools, Marking and marking tools.
UnitIII
 Metal joining: Welding principles, classification of welding techniques; Oxyacetylene Gas welding, equipment and field of application, Arcwelding, metal arc, Carbon arc, submerged arc and atomic hydrogen welding, Electric resistance welding: spot, seam, butt, and percussion welding; Flux: composition, properties and function; Electrodes, Types of joints and edge preparation, Brazing and soldering.
UnitIV
 Sheet Metal Work: Common processes, tools, and equipment; metals used for sheets, the standard specification for sheets, spinning, bending, embossing and coining
Introduction to Computer System (ETCS 109)
Unit I
 Introduction to Computer: Overview of Computer organization and historical perspective computer applications in various fields of science and management.
 Data representation: Number systems, character representation codes, Binary, hex, octal codes, and their interconversions.
 Binary arithmetic, Floatingpoint arithmetic, signed and unsigned numbers.
Unit II
 Introduction to OS and Office Automation: Concept of computing, Introduction to Operating Systems such as DOS, windows 2000/Xp, UNIX, Client Server Technology, etc. (only brief userlevel description). Introduction to World Processing, Spread Sheet & Presentation software e.g. MSWord, MSExcel, MSPowerPoint.
Unit III
 Introduction to Auto CAD: Coordinate System, 2D drafting: lines, circles, arc, polygon, etc., Editing, 3D, Solid modeling, Rendering, Use of Auto CAD for engineering drawing practices.
Unit VI
 Web Technologies: Introduction to World Wide Web, Search engines, email, news, gopher, Audio & Video Conferencing, Internet Protocols: FTP, telnet, TCP/IP, SMTP, HTTP, Languages used for WEB Technology: HTML, practical examples using DHTML and Static HTML
Communication skills – I (ETEL 111)
Unit I
 Remedial Grammar: Errors of Accidence and syntax with reference to Parts of Speech; Agreement of Subject and Verb; Tense and Concord; Conditional Clauses; Use of connectives in Complex and Compound sentences; Question tags and short responses.
Unit II
 Vocabulary and Usage: Word Formations (by adding suffixes and prefixes); Technical Word Formation; Synonyms, Antonyms, Homophones, and Homonyms; One Word Substitution; Misappropriations; Indianisms; Redundant Words; Phrasal Verb Idioms.
Unit III
 Technical Writing: Scientific Attitude and Impersonal Style; Plain Statements, Definitions; Description and Explanations (of objects, instruments, Processes, Scientific Principles, etc.)
 Summarizing and abstracting; Expressing ideas within a restricted word limit; Paragraph Writing (Paragraph division, introduction and the conclusion, Variety in sentences and paragraphs)
 Interpretation and use of charts, graphs, and tables in technical writing.
 Punctuation: Reading at various speeds (slow, fast, very fast); reading different kinds of texts for a different purpose (e.g. for relaxation, for information, for discussion at a later stage, etc.); reading between the lines.
 Comprehension of Unseen Passages
Unit IV
Text: The following prose pieces from Best Science Writing: Reading and Insights edited by Robert Gannon prescribed text [Hyderabad: University Press (India) Limited, 1991].
 Chapter 2: “After 63 years, Why Are They Still Testing Einstein?” by C.P. Gilmore
 Chapter 5: “Star Wars: The Leaky Shield” By Carl Sagan
 Chapter 10: “Chaos: The Ultimate Asymmetry” by Arthur Fisher
 Chapter 11: “Bill Moss, Tentmaker” by Robert Gannon
 Chapter 12: “Totality – A Report” by Michael Rogers
Text Books: Maison, Margaret M. Examine Your English, Hyderabad: Orient Longman, 1980
 Sharma, R.S. Technical Writing. Delhi: Radha Publication, 1999
 Sudarsanam, R. Understanding Technical English. Delhi: Sterling Publishers Pvt. Ltd., 1992
 Gannon, Robert, Edt. Best Science Writing: Readings and Insights. Hyderabad: University Press (India) Limited, 1991.
Impact of Science & Technology on Society (ETEL113)
NonUniversity Examination Scheme (NUES)
There will not be any external examination of the university. The performance of the candidates should continuously be evaluated by an internal committee. The committee may conduct viva voce at the end for the award of the marks.
Applied Physics LAB I (ETPH 151)
List of Experiments
 To plot a graph between the distance of the knifeedge from the center of gravity and the time period of bar pendulum. From the graph, find
 The acceleration due to gravity
 The radius of gyration and the moment of inertia of the bar about an axis.
 To determine the moment of inertia of a flywheel about its own axis of rotation.
 To determine the value of acceleration due to gravity using Kotter’s pendulum.
 To determine the frequency of A.C. mains using sonometer and an electromagnet.
 To determine the frequency of electrically maintained tuning fork by Melde’s method.
 To determine the dispersive power of prism using spectrometer and mercury source.
 To determine the wavelength of sodium light by Newton’s Ring.
 To determine the wavelength of sodium light using diffraction grating.
 To determine the refractive index of a prism using the spectrometer.
 To determine the specific rotation of cane sugar solution with the help of polarimeter.
 To find the wavelength of HeNe Laser using transmission diffraction grating.
 To determine the numeral aperture (NA) of an Optical Fibre.
 Computer simulation (simple application of Monte Carlo) e.g. Brownian motion, charging & discharging of the capacitor.
Note: Any 810 experiments out of the list may be chosen. Proper error – analysis must be carried out with all the experiments.
Engineering Chemistry Lab (ETCH 153)
List of Experiments
 Determine the percentage composition of sodium hydroxide in the given mixture of sodium hydroxide and sodium chloride.
 Determine the amount of Oxalic acid and Sulphuric acid in one liter of solution, given standard sodium hydroxide and Potassium Permanganate.
 Determine the amount of copper in the copper ore solution, provided hypo solution.
 Argentometric titration one each by Vohlard’s method and by Mohr’s method.
 Complexometric titrations.
 Determine the heat of neutralization of strong acid with a strong base.
 Determine the surface tension of a liquid using a drop weight method.
 Determine viscosity of a given liquid (density to be determined).
 Determine the reaction rate constant for the 1st order reaction.
 Determine the cell constant of a conductivity cell and titration of strong acid/strong base conductometrically.
Introduction to AutoCAD, Office Automation and Web Design 3 (ETCS 155)
List of Experiments
Use MicrosoftWord to perform the following:
 Send out an invitation letter to several people using mail merge facility.
 Create tabular data in word and insert graph to represent data.
 Create a Macro and use it in an application.
Use MicrosoftExcel to perform the following:
 Create a Macro and use it in an application
 Enter the name and marks of 10 students and perform various mathematical functions on it.
 Enter firstquarter performance of five companies and create a pie chart showing their shareholders in the market.
Use Microsoft PowerPoint to perform the following
 Create a slide show on any subject of your choice using a minimum of five slides.
 Create a slideshow in operating sound.
 Create an animation using group, ungroup, order, textbox image insert, etc.
Use HTML to design a Home page for IGIT using all the features of HTML like buttons, frames, marquee checkboxes, etc.
Use AutoCAD to do the following:
 Use of Drawing & Editing Properties: Modify Object Properties and knowhow of layers, colors and prototype drawing.
 Draw the line (Polyline, multiline, linear line), polygon, ellipse, circle, arc, rectangle and use crosshatching, regions, boundary, spline, donut, fillet and extent commands.
 Dimensioning commands, styles, control scale factors, drawing setup, grip editing objects snap utility commands.
 Projection of points, lines, and solids,
 Section of Solids
 Development and Intersection of Surface
 Isomeric Projections
Create a WEB page containing hyperlinks to the pages having information about Science and Technology.
Workshop Practice (ETME 157)
Unit I
 Materials: Spectrography method for finding the composition of materials.
 Wood Working Shop: Making of various joints, Pattern making.
Unit II
 Foundry Shop: Bench molding with single piece pattern and twopiece pattern.
 Floor molding: Making of bend pipe mold etc.
 Machine molding: Making of mold using Matchplate pattern.
 Core making: Making and baking of dry sand cores for placing in horizontal, vertical and hanging positions in the mold cavity.
 Fitting Shop: Learning the use of fitting hand tools, marking tools, marking gauge.
 Exercises: Jobs made out of MS Flats, making saw – cut filling Vcut taper at the corners, circular cut, fitting square in a square, triangle in a square.
Unit III
 Welding Shop: Electric arc welding, Edge preparations, Exercises making of various joints. Bead formation in horizontal, vertical and overhead positions.
 Gas Welding: OxyAcetylene welding and cutting of ferrous metals.
 Soldering: Dip soldering.
 Brazing: With OxyAcetylene gas.
Unit IV
 Sheet Metal Shop: Learning the use of sheetmetal tools, Exercises: Making jobs out of GI sheet metal. Cylindrical, Conical and Prismatic shapes.
 Project Shop: Extrusion of soft metals, Plastic coating of copper wires, Plastic molding.
Engineering Graphics LAB (ETME 159)
Unit I
 General: Importance, Significance, and scope of engineering drawing, Lettering, Dimensioning, Scales, Sense of proportioning, Different types of projections, Orthographic Projection, B.I.S. Specifications,
 Projections of Point and Lines: Introduction of planes of projection, Reference and auxiliary planes, projections of Points and Lines in different quadrants, traces, inclinations, and true lengths of the lines, projections on Auxiliary planes, shortest distance, intersecting and nonintersecting lines.
Unit II
 Planes other than the Reference Planes: Introduction of other planes (perpendicular and oblique), their traces, inclinations, etc., Projections of points and lines lying in the planes, conversion of an oblique plane into auxiliary Plane and solution of related problems.
 Projections of Plane Figures: Different cases of plane figures (of different shapes) making different angles with one or both reference planes and lines lying in the plane figures making different given angles (with one of both reference planes). Obtaining true shape of the plane figure by projection.
Unit III
Projection of Solids: Simple cases when solid is placed in different positions, Axis faces and lines lying in the faces of the solid making given angles.CADD
UnitIV
 Isometric Projection Nomography: Basic Concepts and use.
 Text Books: Engineering drawing by N.D.Bhatt (Charotar Publications).
 Reference Books: Engineering Drawing by S.C.Sharma & Navin Kumar (Galgotia Publications)
 Engineering Drawing by Venugopalan.
 Engineering Drawing by P.S.Gill
Applied Mathematics – II (ETMA102)
Unit I
 Calculus of Several variables: Partial differentiation, ordinary derivatives of first and second order in terms of partial derivatives, Euler’s theorem on homogeneous functions, change of variables, Taylor’s theorem of two variables and its application to approximate errors. Maxima and Minima of two variables, Lagrange’s method of undermined multipliers and Jacobians.
Unit II
 The function of Complex variables: Derivatives of complex functions, Analytic functions, CauchyRiemann equations, Harmonic Conjugates, Conformal mapping, Standard mappings – linear, square, inverse and bilinear. Complex line integral, Cauchy’s integral theorem, Cauchy’s integral formula, Zeros and Singularities / Taylor series, Laurents series, Calculation of residues. Residue theorem, Evaluation, and real integrals.
Unit III
 Vectors Calculus: Scalar and Vector point functions, Gradient, Divergence, Curl with geometrical physical interpretations, Directional: derivatives, Properties.
 Line integrals and application to work done, Green’s Lemma, Surface integrals and Volume integrals, Stoke’s theorem and Gauss divergence theorem (both without proof).
Unit IV
 Laplace Transformation: Existence condition, Laplace transform of standard functions, Properties, Inverse Laplace transform of functions using partial fractions, Convolution, and convolution theorem. Solving linear differential equations using Laplace transforms. Unit step function, Impulse function, and Periodic function and their transforms.
APPLIED PHYSICS – II (ETPH104)
Unit I
 Electromagnetic Theory (EMT): Motion of Charged Particles in crossed electric & magnetic fields, Velocity Selector & Magnetic focussing, Gauss law, continuity equation, inconsistency in Ampere’s Law, Maxwell’s equations (differential and integral forms), Poynting vector, Poynting Theorem (Statement only), propagation of plane electromagnetic waves in conducting and nonconducting medium. [No. of Hrs. 8]
Unit II
 Quantum Mechanics & Statistical Physics: DeBroglie Hypothesis, Davisson Germer experiment, wave function and its properties, expectation value, Wave Packet, Uncertainly principle. Schrodinger Equation for free Particle, TimeDependent Schrodinger Equation, Particle in a box (1D), Singlestep Barrier, Tunneling effect.
 Qualitative Features of Maxwell Boltzmann, BoseEinstein and FermiDirac statistics distribution, functions & their comparison (no derivation)
Unit III
 Solid State Physics: Formation of energy bands in metals, semiconductors, and insulators; intrinsic and extrinsic semiconductors, Fermi energy levels for doped, undoped semiconductors and pn junction; Tunnel diode, Zener diode.
 Superconductivity: Meissner Effect, Type I and Type II Superconductors, BCS theory (Qualitative only), London’s equation, properties of superconductors & applications.
Unit IV
 XRays: production and properties, Crystalline and Amorphous solids (Brief) Bragg’s Law, Applications.
 Ultrasonics: Introduction, Production of Ultrasonics (Magentostriction and piezoelectric methods), engineering applications.
Environmental Studies (ETCH – 106)
Unit I
Multidisciplinary Nature of Environmental Studies: Definition, scope, and important need for public awareness, introduction to the concept of green technology.
Unit II
 Environmental Conservation and Management
 Forest resources: Use and overexploitation, deforestation, Timber extraction, mining, dams and their effects on forest and tribal people.
 Water resources: Use and overutilization of surface and groundwater, floods, drought, conflicts over water, damsbenefits, and problems.
 Mineral resources: Use and exploitation, environmental effects of extracting and using mineral resources.
 Food resources: World food problems, changes caused by agriculture and overgrazing, effects of modern agriculture, fertilizerpesticide problems, waterlogging, salinity.
 Energy resources: Growing energy needs, renewable and nonrenewable energy sources, use of alternate energy sourcesgreen fuel.
 Land resources: Land as a resource, land degradation, man induced landslides, soil erosion and desertification.
 Resource ManagementSustainable development.
Unit III
 Environmental Pollution & Control
 Air Pollution: Types of pollutants, source, effects, sink & control of primary pollutants CO, NO_{X}, HC, SOx and particulates, the effect of pollutants on man & Environment: photochemical smog, acid rain, and global warming, CO_{2} Sequestration.
 Water Pollution: Classification of Pollutants, their sources, wastewater treatment (domestic and industrial).
 Soil Pollution: Composition of soil, classification, and effects of solid pollutants and their control.
 Solid Waste Pollution: Classification, waste treatment and disposal methods; compositing, sanitary landfilling, thermal processes, recycling, and reuse methods. Hazardous wastes – Classification, radioactive, biomedical & chemical, treatment and disposal Physical, chemical and biological processes.
 Marine Pollution: Causes, effects, and control of marine pollution, coastal zone management.
Unit IV
 Chemical Toxicology: Toxic chemicals in the environment, Impact of toxic chemicals on enzymes, biochemical effects of arsenic, cadmium, lead, chromium, mercury, biochemical effects of pesticides.
Unit V
 EcoFriendly Polymers: Polymer synthesis, Environmental degradation of polymers, photodegradable polymers, hydrolysis, and hydrobiodegradable polymers, biopolymers and bioplastics, thermal degradation of plastics during recycling.
Unit VI
 Environmental Biotechnology: Bioaccumulation, biodegradation, bioremediation, bioleaching, Biomethanation,
Unit VII
 Green Technology: Introduction, Basic principles of green technology, the concept of Atom economy, Tools of Green technology, zerowaste technology.
Unit VIII
 Enviromental Management Systems: Objectives, Components, Environmental Impact Assessment, Some important Environmental laws, Green bench, Carbon Credits, Environmental Management System standardsISO 14000 series.
Introduction to Programming (ETCS 108)
Unit I
 Introduction to Programming: Concept of algorithms, Flow Charts, Data Flow diagrams etc., Introduction to the Editing tools such as vi or MSVC editors, Concepts of the finite storage, bits bytes, kilo, mega and gigabytes. Concepts of character representation, Number Systems & Binary Arithmetic.
Unit II
 Programming using C: The emphasis should be more on programming techniques rather than the language itself. The C Programming language is being chosen mainly because of the availability of the compilers, books and other reference materials.
 Example of some simple C program. Concept of variables, program statements and function calls from the library (Print for example)
 C data types, int, char, float, etc., C expressions, arithmetic operation, relational and logic operations, C assignment statements, an extension of assignment of the operations. C primitive inputoutput using getchar and putchar, exposure to the scent and print functions, C Statements, conditional executing using if, else. Optionally switch and break statements may be mentioned.
Unit III
 Iterations and Subprograms: Concept of loops, an example of loops in C using for, while and dowhile. Optionally continue may be mentioned.
 One dimensional array and example of iterative programs using arrays, 2d arrays Use in matrix computations.
 Concept of Subprogramming, functions Example of functions. Argument passing mainly for the simple variables.
Unit IV
 Pointers and Strings: Pointers, the relationship between arrays and pointers Argument passing using pointers Array of pointers. Passing arrays as arguments.
 Strings and C string library.
 Structure and Unions. Defining C structures, passing strings as arguments Programming examples.
Engineering Mechanics (ETME 110)
UNIT I
 Force system: Free body diagram, Equilibrium equations, and applications.
 Friction: Static and Kinetic friction, laws of dry friction, coefficient of friction, angle of friction, angle of repose, cone of friction, friction lock, the friction of flat pivot and collared thrust bearings, Belt drive derivation of the equation.
T1/T2 =e^^{e} and its application
 Structure: Plane truss, perfect and imperfect truss, the assumption in the truss analysis, analysis of perfect plane trusses by the method of joints, method of section.
 Distributed Force: Determination of center of gravity, a center of mass and centroid by direct integration and by the method of composite bodies, mass moment of inertia and area moment of inertia by direct integration and composite bodies method, the radius of gyration, parallel axis theorem, Pappus theorems, polar moment of inertia.
Unit III
 Kinematics of Particles: Rectilinear motion, plane curvilinear motionrectangular coordinates, normal and tangential component.
 Kinetics of Particles: Equation of motion, rectilinear motion, and curvilinear motion, workenergy equation, conservation of energy, impulse and momentum conservation of momentum, the impact of bodies, coefficient of restitution, loss of energy during impact.
Unit IV
 Kinematics of Rigid Bodies: Concept of a rigid body, type of rigid body motion, absolute motion, introduction to relative velocity, relative acceleration (Corioli’s component excluded) and instantaneous center of velocity, Velocity and acceleration polygons for fourbar mechanism and single slider mechanism.
 Kinetics of Rigid Bodies: Equation of motion, translatory motion and fixed axis rotation, application of work energy principles to rigid bodies conservation of energy.
 Shear force and bending Moment Diagram.
Electrical Science (ETEC 112)
Unit I
 Circuit Analysis: Ohm’s Law, KCL, KVL Mesh and Nodal Analysis, Circuit parameters, energy storage aspects, Superposition, Thevenin’s, Norton’s, Reciprocity, Maximum Power Transfer Theorem, Millman’s Theorem, StarDelta Transformation. Application of theorem to the Analysis of dc circuits.
Unit II
 A.C.Circuits: RL, RC, RLC circuits (series and parallel), Time Constant, Phasor representation, Response of RL, RC and RLC circuit to sinusoidal input Resonanceseries and parallel RLC Circuits, Qfactor, Bandwidth.
Unit III
 Measuring Instruments: Principles, Construction, and application of moving coil, moving the iron, dynamometer type, induction type instruments, the extension of the range of ammeter, voltmeter (shunt and multiplier), Twowattmeter method, for the measurement of power, Catholray Oscilloscope, and Applications.
Unit IV
 Transformers: Construction and Working principles and phaser diagrams of Singlephase Transformer, Emf equation, Equivalent circuit, Regulation and efficiency, and Autotransformer. Rotating Machines
 Construction and working principles of dc motor and generator and its characteristics Applications of DC machines
 Construction and working principles of a 39Induction motor, Torquespeed characteristics, and Industrial applications.
Communication Skills II (ETEL 114)
Unit I
Basic Concepts in Communication: Communication as sharing; the context of communication; the speaker/writer and the listener/reader; a medium of communication; barriers to communication; accuracy, brevity, clarity, and appropriateness in communication.
Unit II
Writing Skills: Types of writings (Expository, Descriptive, Analytic, Argumentative, Narrative, etc) and their main features. Resumes and CV and Cover letters. Memos and Notices. Basics of Formal Reports.
Unit III
Verbal, NonVerbal and Listening Skills: Elementary Phonetics (Speech Mechanism, The Description of Speech Sounds, The Phoneme, the syllable; Prosodic Features, Word Accent, Features of Connected Speech); Paralanguage and Body language; and Classroom Presentations, Hearing and Listening; Essentials of Good Listening: Achieving ability to comprehend material delivered at relatively fast speed.
Unit IV
Group Discussion: Use of persuasive strategies including some rhetorical devices for emphasizing (for instance; being polite and firm; handling questions and taking in criticism of self; turntaking strategies and effective intervention; use of body language).
Applied Physics Lab II (ETPH 152)
List of Experiments
 To determine the value of e/m of an electron by J.J. Thomson method.
 To determine unknown resistance of a wire by Carey Foster’s Bridge.
 To determine the internal resistance of the Leclanche cell using a potentiometer.
 To study the charging and discharging of a capacitor and to find out the time constant.
 To find the thermal conductivity of a poor conductor by Lee’s disk method.
 To study the Thermo emf using thermocouple and resistance using Pt. Resistance thermometer.
 To determine the velocity of ultrasound waves using an ultrasonic spectrometer in a given liquid (Kerosene Oil)
 To measure the frequency of a sinewave voltage obtain from the signal generator and to obtain Lissajous pattern on the CRO screen by feeding two sine wave voltage from two signal generator.
 To determine the temp. coefficient of resistance of platinum by Callender & Griffith’s Bridge.
 To study the Hall effect.
 To determine plank’s constant.
C Programming Lab (ETCS 156)
List of Experiments
 Write a program to produce ASCII equivalent of a given number
 Write a program to find divisor or factorial of a given number.
 Write a program to evaluate the following algebraic expressions after reading necessary values from the user
 (ax+b)/(axb)
 5 log xcos 30+  x^{A}2y^{A}2i+sqrt (2xy)
 (xA5+10xA4+8xA3+4x+2
 Write a program to find the sum of a geometric series
 Write a program to cipher a string
 Write a program to check whether a given string follows English capitalization rules
 Write a program to find the sum of the following series
1+ E2 + 1/3 +_____ +1/20
 Write a program to search whether a given substring exists in an input string or not and then delete this string from the input string.
 Write a recursive program for a tower of Hanoi problem
 The Fibonacci sequence of numbers is 1,1,2,3,5,8.. Based on the recurrence relation
F(n)=F(n1)+F(n2)for n>2
Write a recursive program to print the first m Fibonacci number
 Write a menudriven program for matrices to do the following operation depending on whether the operation requires one or two matrices
 Addition of two matrices
 Subtraction of two matrices
 Finding upper and lower triangular matrices
 Trace of a matrix
 Transpose of a matrix
 Check of matrix symmetry
 Product of two matrices.
 Write a program that takes two operands and one operator from the user performs the operation and then print the answer
 Write a program to print the following outputs:
1  1  
2  2  2  2  
3  3  3  3  3 3  
4  4  4  4  4 4  4 4  
5  5  5  5  5  5 5  5 5 
 Write functions to add, subtract, multiply and divide two complex numbers (x+iy) and (a+ib) Also write the main program.
 Write a menudriven program for searching an sorting with following options:
a)  Searching  (1)  Linear searching 
(2)  Binary searching  
b)  Sorting  (1)  Intersection sort 
(2)  Selection sorting 
 Write a program to copy one file to other, use command line arguments.
 Write a program to mask some bit of a number (using bit operations)
 An array of record contains information of managers and workers of a company. Print all the data of managers and workers in separate files.
Engineering Mechanics Lab (ETME 158)
List of Experiments
 To verify the law of Force Polygon
 To verify the law of Moments using Parallel Force apparatus. (simply supported type)
 To determine the coefficient of friction between wood and various surface (like Leather, Wood, Aluminum) on an inclined plane.
 To find the forces in the members of Jib Crane.
 To determine the mechanical advantage, velocity ratio and efficiency of a screw jack.
 To determine the mechanical advantage, Velocity ratio and Mechanical efficiency of the Wheel and Axle
 To determine the MA, VR, n of Worm Wheel ( 2start)
 Verification of force transmitted by members of the given truss.
 To verify the law of moments using Bell crank lever
 To find CG and Moment of Inertia of an irregular body using Computation method.
Electrical Science Lab (ETEC 160)
Latest Applications For Various UG & PG Courses Open 2021:

 Lovely Professional University, Punjab  Admissions Open for All Courses 2021. Apply Now
 UPES, Dehradun  Admissions Open for All Courses 2021. Apply Now
 Chandigarh University, Punjab  Admissions Open for All Courses 2021. Apply Now
 GD Goenka, Gurgaon  Admission Open for All Courses 2021. Apply Now
 DIT University, Dehradun  Admission Open for All Courses 2021. Apply Now
 Manav Rachna University, Haryana  Admission Open for all courses 2021. Apply Now
 Sharda University  Admission Open all courses 2021. Apply Now
List of Experiments
 Verification of Thevenin’s theorem
 Verification of Superposition theorem
 Phasor Diagram and Power factor of the LCR circuit.
 Measurement of Power and Power factor in singlephase Load using three ammeters/voltmeters.
 calibration of Energy Meter/Wattmeter/Voltmeter/Ammeter
 Two wattmeter method of measuring power in the threephase circuit (resistive load only)
 Load test on Single Phase Transformer, Regulation, and Efficiency of Transformer
 Short Circuit/Open Circuit tests on Single Phase transformer
 Measure the armature and field resistance of a D.C. Machine
 Connection and starting of a Three Phase Induction Motor using directly online.
If you have any other queries related to IPU CET 2021 Syllabus, you can ask us by leaving your comments below in the comment box.
Syllabus for ipu cet code124 paramedical?